Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Momma, Yuichiro*; Sakairi, Masatoshi*; Ueno, Fumiyoshi; Otani, Kyohei
Zairyo To Kankyo, 71(5), p.133 - 137, 2022/05
The effect of the corrosion inhibitor on the corrosion of steel under a thin solution layer was investigated. As a result of forming a thin solution layer with a thickness of 1.0-0.2 mm on the specimen, adding a mixed solution of sodium molybdate and aluminum lactate as a corrosion inhibitor, and performing electrochemical measurement, the corrosion inhibitor suppresses the anodic reaction. And in the thin solution layer, it was suggested that the morphology of the protective layer structure by the corrosion inhibitor changed according to the amount of liquid as compared with the bulk immersion.
Saito, Shigeru; Wan, T.*; Okubo, Nariaki; Kita, Satoshi*; Obayashi, Hironari; Sasa, Toshinobu
JAEA-Technology 2021-034, 94 Pages, 2022/03
JAEA-Technology-2021-034.pdf:5.91MB
Lead-bismuth eutectic alloy (LBE) is a major candidate for a spallation target material and core coolant of an accelerator driven system (ADS) which has been developed in the Japan Atomic Energy Agency (JAEA) to transmute high-level radioactive wastes. A proton irradiation facility to build a material irradiation database for future ADS development is under considering in the J-PARC. To realize both the ADS and the above-mentioned facility, there are many issues on operational safety of LBE to be solved. Especially, corrosion data for the major materials such as T91 (Modified 9Cr-1Mo steel) and SS316L at the temperature range between 400 and 550 
C under the conditions of flowing LBE with a controlled oxygen are not sufficient to design the ADS and the facility. JAEA developed a new large-scale corrosion test loop named "OLLOCHI (Oxygen-controlled LBE LOop for Corrosion tests in HIgh-temperature)" aiming to perform the compatibility tests between the LBE and the steels, as well as to develop the LBE operation technology. OLLOCHI has a function to automatically control the oxygen concentration in LBE. The maximum temperature at the regions of high-temperature and low-temperature of the OLLOCHI are 550 C and 450 C respectively to cover the ADS designed condition. As a result of 2,000 hours operation, it was demonstrated that the OLLOCHI showed the designed performance. In this report, outline of the OLLOCHI, details of the components, results of characteristic tests, and the future experimental plan are described.
Nagase, Yoshiyuki*; Masuda, Kaoru*; Wada, Ryutaro*; Yamamoto, Ichiro*; Tomioka, Osamu; Meguro, Yoshihiro; Fukuzato, Ryuichi*
Proceedings of 2nd International Symposium on Supercritical Fluid Technology for Energy and Environment Applications (Super Green 2003), p.254 - 257, 2004/00
no abstracts in English
Taniguchi, Naoki; Kawakami, Susumu; *
JNC TN8400 2001-025, 27 Pages, 2002/03
JNC-TN8400-2001-025.pdf:1.16MB
It is essential to understand the corrosion type of carbon steel under the repository conditions for the lifetime assessment of carbon steel overpack used for geological isolation of high-level radioactive waste. According to the previous study, carbon steel is hard to passivate in buffer material assuming a chemical condition range of groundwater in Japan. However, concrete support will be constructed around the overpack in the case of repository in the soft rock system and groundwater having a higher pH may infiltrate to buffer material. There is a possibility that the corrosion type of carbon steel will be influenced by the rise of the pH in groundwater. In this study, anodic polarization experiments were performed to understand the passivation condition of carbon steel in buffer material saturated with water contacted with concrete. An ordinary concrete and a low-alkalinity concrete were used in the experiment. The results of the experiments showed that the carbon steel can passivate under the condition that water having pH 
13 infiltrate to the buffer material assuming present property of buffer material. If the low-alkalinity concrete is selected as the support material, passivation can not occur on carbon steel overpack. The effect of the factors of buffer material such as dry density and mixing ratio of sand on the passivation of carbon steel was also studied. The results of the study showed that the present property of buffer material is enough to prevent passivation of carbon steel.
Department of Hot Laboratories
JAERI-Review 2001-044, 95 Pages, 2001/12
JAERI-Review-2001-044.pdf:6.55MB
no abstracts in English
Sasa, Toshinobu; Saito, Shigeru; Kikuchi, Kenji; Kurata, Yuji; Futakawa, Masatoshi
Transactions of the American Nuclear Society, 85, p.299 - 300, 2001/11
Study of liquid lead-bismuth (Pb-Bi) technology is performed at JAERI. Pb-Bi cooled ADS has favorite neutronic performances rather than that of sodium-cooled ADS. In order to develop an ADS, JAERI has proposed a transmutation experimental facility which consists of a 600 MeV-200 kW Pb-Bi spallation target and a fast critical assembly with a spallation target within a framework of the high intensity proton accelerator project. In the viewpoint of engineering application of Pb-Bi, there is a key technology, which should be proven before the construction of TEF. They are materials issues and handling techniques of flowing eutectic Pb-Bi. To control these technical issues, we proceed two experimental studies with the material corrosion test device and the liquid Pb-Bi loop.
Hama, Katsuhiro; Taniguchi, Naoki; Honda, Akira
JNC TN7430 2000-002, 25 Pages, 2001/01
JNC-TN7430-2000-002.pdf:3.32MB
The burial tests of mild steel and pure titanium were performed in a gallery at Tono mine to assess the corrosion resistance of these materials under goundwater environment. Specimens were placed in the container and immersed into groundwater. After the immersion period, the apperance of the surface of these specimens were observed. The corrosion product of mild steel specimen was analysed by various methods. The average corrosion rate of mild steel for 10 years was assessed by the measurement of the weight loss of carbon steel specimen. The results of the test were summerised as follows : (1)The average corrosion rate of mild steel for 10 years was assessed to be 4.36 
10
mm/y by the weight loss of the specimen. (2)The corrosion product consists of outer porous substance and inner tight corrosion product film. The former contains ferric oxide such as goethite and the latter contains ferrous oxide such as magnetite. (3)The evidence of the initiation of localised corrosion was not observed on the titanium specimens.
Taniguchi, Naoki; ; Kawasaki, Manabu*; Masugata, Tsuyoshi*
JNC TN8400 2001-001, 56 Pages, 2000/12
JNC-TN8400-2001-001.pdf:2.05MB
It is necessary to clear the effects of corrosion products on the corrosion life time of carbon steel overpack for geological isolation of high-level radioactive waste(HLW). Especially, it is important to understand the effects of magnetite because magnetite as a simulated corrosion product is reported to accelerate the corrosion rate of carbon steel. In this study, corrosion tests to reproduce the acceleration of corrosion due to magnetite was performed and the mechanism of the acceleration was investigated to evaluate the effects of magnetite as a corrosion product. Based on the results of experiments, following conclusions are obtained ; (1)Magnetite powder accelerates the corrosion rate of carbon steel. The main reaction of corrosion under the presence of magnetite is the reduction of Fe(III) in magnetite to Fe(II), but the reaction of hydrogen generation is also accelerated. The contribution of hydrogen generation reaction was estimated to be about 30% in the total corrosion reaction based on the experimental result of immersion test under the presence of magnetite. (2)Actual corrosion products containing magnetite generated by the corrosion of carbon steel protect the metal from the propagation of corrosion. The corrosion depth of carbon steel overpack due to magnetite was estimated to be about 1 mm based on the results of experiments. Even if the effect of magnetite is taken into the assessment of corrosion lifetime of overpack, total corrosion depth in 1000 years is estimated to be 33 mm, which is smaller than the corrosion allowance of 40 mm described in the second progress report on research and development for the geological disposal of HLM/ in Japan. It was concluded that the effect of magnetite on the corrosion life time of carbon steel overpack is negligible.
gas cooled reactor; ; Mizuta, Shunji
JNC TN9400 2000-040, 41 Pages, 2000/03
JNC-TN9400-2000-040.pdf:0.85MB
The corrosion behavior of ferritic stainless steels applied to core components under C0 gas environment was investigated in order to be helpful to fuel design in C0 gas cooled reactor as the feasibility study for fast breeder reactor. The dependence of the corrosion behavior, before a breakaway occurs, on C0 gas temperature, Si and Cr contents of ferritic steels was determined quantitatively. The following correlations to calculate the metal loss thickness was established. X = 4.4w w = √(kt) k = 
exp( - 5.45[Si]) exp( - 1.09[Cr]) exp( - 11253/T) = 1.65 10
4.40 10
X : metal loss thickness[
ml, w : corrosion weight gain [mg/cm
] k : parabola constant [(mg/cm)/hr], t : time [hr], : constant [Si] : Si content[wt.%], [Cr] : Cr content [wt.%], T : temperature [K]
Iriya, Keishiro*; *; Fujita, Hideki*; Kubo, Hiroshi*
JNC TJ8400 2000-034, 212 Pages, 2000/02
JNC-TJ8400-2000-034.pdf:7.91MB
Cementious materials and highly compacted bentnite are expectable candidates as materials of TRU waste repositories. It was pointed out that Bentonite might be changed to Zeolite and surrounding rock might be altered by high alkalinity water flow, since cement hydrate leached to pore water of cement and it was changed to alkaline. Transportation of radio-nuclides might be accelerated by organic materials, such as super plasticizer, and nitlate which is contained in nuclear wastes. It was concluded by previous studies that rock and bentonite is stable in alkaline water which pH is less than 10.5. The new type of low alkalinity cement with high silica fume and fly ash content which could keep pH below 11.0 was developed and its performance has been assessed. However since Zeolitation and ilitation were reported upon deterioration of bentonite bated in certain condition, it should be assessed by long term experiment. Since Capacity of keeping integrity of bentonite hasn't been directly checked by experiments upon the developed new type of low alkalinity cement it should be done. Although amount of leaching organic was quantitatively and experimentally assessed at an early age, effect of changing of amount and shape hasn't assessed in leaching of radio nuclides. Although it is pointed out that deterioration of cementitious materials isn't accelerated by condensed nitrate solution at early period after closure, it is considered that it might be accelerated corresponding to chemical composition in case of decrement of concentration of nitrate. In this study, deterioration of materials will be assessed in detail in order to feed back the results to assessment of transportation of radio nuclides. Long term deterioration of bentonite by leaching water of cement will be experimentally assessed, and deteriorating test of bentonite will be carried out by leaching water of low alkalinity cement. Amount of organic and component of it will be measured. Furthermore ...
Iriya, Keishiro*; *; Kubo, Hiroshi*; Fujita, Hideki*
JNC TJ8400 2000-033, 95 Pages, 2000/02
JNC-TJ8400-2000-033.pdf:11.11MB
Cementious materials and highly compacted bentnite are expectable candidates as materials of TRU waste repositories. It was pointed out that Bentonite might be changed to Zeolite and surrounding rock might be altered by high alkalinity water flow, since cement hydrate leached to pore water of cement and it was changed to alkaline. Transportation of radio-nuclides might be accelerated by organic materials, such as super plasticizer, and nitrate which is contained in nuclear wastes. It was concluded by previous studies that rock and bentonite is stable in alkaline water which pH is less than 10.5. The new type of low alkalinity cement with high silica fume and fly ash content which could keep pH below 11.0 was developed and its performance has been assessed. However since Zeolitation and ilitation were reported upon deterioration of bentonite bated in certain condition, it should be assessed by long term experiment. Since Capacity of keeping integrity of bentonite hasn't been directly checked by experiments upon the developed new type of low alkalinity cement it should be done. Although amount of leaching organic was quantitatively and experimentally assessed at an early age, effect of changing of amount and shape hasn't assessed in leaching of radio nuclides. Although it is pointed out that deterioration of cementitious materials isn't accelerated by condensed nitrate solution at early period after closure, it is considered that it might be accelerated corresponding to chemical composition in case of decrement of concentration of nitrate. In this study, deterioration of materials will be assessed in detail in order to feed back the results to assessment of transportation of radio nuclides. Long term deterioration of bentonite by leaching water of cement will be experimentally assessed, and deteriorating test of bentonite will be carried out by leaching water of low alkalinity cement. Amount of organic and component of it will be measured. Furthermore ...
Sumiyama, Morio*
JNC TJ8400 2000-009, 138 Pages, 2000/02
To evaluate corrosion behavior of carbon steel, a candidate materials of overpack, buried in soil for a long time, the water pipes buried in freshwater clay for a long time we digged out and the soil environment and the corrosion weight loss of pipes have been researched. From the results, a corrosion model (an empirical equation), an oxygen reduction reaction rate-determing step type, of carbon steel buried in soil was introduced. The corrosion data of under ground pipe collected by the Japan Community Gas Associations was used to increase reliability of the corrosion model equation. These data are one of researches of corrosion behavior of carbon steel buried in soil for a long time studied by at home and abroad. 38 samples buried freshwater clay were selected in 171 samples. With estimating the corrosion velocities and the soil environment factors of the above data, the maximum depth of pit corrosion was calculated by the statistical method of the extreme values using the area of overpack as the recurrent time. The correlation between the soil environment factors and the corrosion weight loss was obtained by the correlation analysis. The corrosion model of the maximum depth of pit corrosion at 0.99 of cumulative probability was compared between the under ground pipe data and the above data. On the reference data and the above data, the corrosion model equation; H = aY
was compared with the maximum depth of pit corrosion at 0.99 cumulative probability. The data of water pipes and community gas pipes at 0.99 cumulative probability showed the reasonable values when these data were compared with the reference data. So that the model was proved as a good corrosion model m the neutral low dissolved oxygen environment.
Imai, Jun*
JNC TJ8400 2000-008, 196 Pages, 2000/02
JNC-TJ8400-2000-008.pdf:25.25MB
The objective of this research is to make clear long-term alteration processes of bentonite contacting with concrete under a repository condition for radioactive waste. The Uzu tunnel in yamagata prefecture in Japan, constructed during the term of December of 1963 to July 1967, was selected as an appropriate natural analogue: the tunnel wall was made of portland cement and which has been contacting with a bentonite bed during 
32 years. Sample analyses indicated that the original bentonite was Na
-type and it changed to Ca
-type in the range of a few millimeters from the contact. Although a Ca leaching was also observed from the concrete near the contact, neither transformation to zeolite nor to illite was recognized. On the other hand, sulfur increased and ettringite (3CaO 
AlO
3CaSO
4 32HO) was recognized in the concrete within the depth about 30 mm from the contact.
Saito, Junichi; Morinaga, Masahiko*; Kano, Shigeki
PNC TN9410 98-072, 97 Pages, 1998/07
Research on structural materials which will be utilized even in the severe environment of high-temperature liquid alkali metals has been promoted in order to develop the frontiers of materials techniques. The super-heat resisting alloys which are based on refractory metals, Nb and Mo, are aimed as promising materials used in such an environment. The corrosion resistance in liquid Li and the mechanical properties such as creep and tensile strengths at high temperatures are important for these structural materials. On the basis of many expeliments and analyses of these properties at 1473K, the material design of Nb-based and Mo-based alloys has-been carried out successfully. In this report, all the previous experimental results of corrosion tests in liquid Li were summarized systematically for Nb-based and Mo-based alloys. The corrosion mechanism was proposed on the basis of a series of analyses, in particular, focussing on the deposition mechanism of corrosion products on the surface and also on the initiation and growth mechanism of cracks on the corroded surface of Nb-based alloys. The principal results are as follows. (1)For the deposition mechanism, a reaction took place first between dissolved metallic elements and nitrogen which existed as an impurity in liquid Li and then corrosion products (nitrides) precipitated on the metal surface. Subsequently, another reaction took place between dissolved metalic elements in liquid Li, and corrosion products (intermetallic compounds) precipitated on the metal surface. The composition of deposited corrosion products could be predicted on the basis of the deposition mechanism. (2)For the crack initiation mechanism, the chemical potential diagrams were utilized in order to understand the formation of Li-M-O ternary oxides which caused cracks to be formed on the corroded surface. Consequently, it was evident that not only the concentration of the dissolved oxygen in the alloy but also the concentration of Li which ...
